Type II Safetycade Barricade With Custom Legends

The Safetycade is a Traffic Safety Barricade made of High-Density Polyethylene composed of a large panel upright with custom legends and two sand-filled feet. The feet are spring-loaded and fold when needed, accepts one “D” cell battery light for higher visibility and a ballast boot for extra weight to secure it in place.

Features and Benefits:

• Collapsible vertical panel that lies flat when hit for durability
• Spring-loaded feet, quick release for placement
• Anti-skid pads on feet to ensure placement
• Optional ballast boots snap-on feet adding 20 lbs. each for added stability, sold separately
• Molded-in light receptacle for night vision
• Retroreflective striped sheeting available in 3M Engineer Grade and High-Intensity Prismatic Grade for higher visibility
• Safetycade with stripped sheeting available separately
• Added Replacement parts and components available separately
• NCHRP-350 Accepted, Meets MUTCD Standards
• MASH Accepted - WZ-410

The Safetycade is a traffic safety device designed to be more durable and flexible than other barricades. The top upright panel can be personalized with a custom legend, and the bottom panel comes with striped sheeting, both available in EG or HIP for extra visibility and protection for vehicles and workers.

Its design makes it one of the easier barricades to handle, transport and store while also being durable, made of High-Density Polyethylene this barricade can resist impacts and folds down when hit to prevent accidents. The component parts are also available separately, accessories like barricade lights or ballast boot are recommended for weight and visibility.

Made in the USA 

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• 7.5 lb. feet - filled with silica sand
• Optional ballast boots snap-on feet adding 20 lbs. each
• Weight: 29 lbs., 69 lbs. with ballast boots
• 33"W x 42.5"H x 3"D
• Sheeting available in 3M EG & HIP
• Added Replacement parts and components available separately
• NCHRP-350 Accepted, Meets MUTCD Standards
• MASH Accepted - WZ-410

Technical Documents and Certifications:

State Reference Guide
Learn more about traffic product certifications and specifications for your state.

Florida
Florida QPL
Florida Standard Specifications
Certified for use:
102-028-017
Products must have approval number stenciled or stamped on unit
DOT Sheeting Requirement – ASTM D4956, Type III
Plasticade meets the specification by supplying 3M™ High-Intensity Prismatic Grade

Illinois
No QPL
IL State Supplement
IL Standard Specifications
IL Design Standards
Certified for use:
DOT Sheeting Requirement – ASTM D4956, Type III/IV
Plasticade meets the specification by supplying 3M™ High Intensity Prismatic Grade

Missouri
No QPL
MO State Manual
Standards and Specifications
Certified for use:
DOT Sheeting Requirement – ASTM D4956, Type IV
Plasticade meets the specification by supplying 3M™ High Intensity Prismatic Grade

Pennsylvania
PA QPL
Approved Products for Lower Volume Roads
PA State Supplement
Certified for use:
DOT Sheeting Requirement – ASTM D4956, Type IV
Plasticade meets the specification by supplying 3M™ High Intensity Prismatic Grade

Texas
TX Compliant Work Zone Devices
Texas MUTCD
TX Standard Traffic Drawings
Certified for use:
DOT Sheeting Requirement – ASTM D4956, Type III
Plasticade meets the specification by supplying 3M™ High Intensity Prismatic Grade

Virginia
No QPL
VA Roadside and Safety Devices
VA State Supplement
Certified for use:
DOT Sheeting Requirement – ASTM D4956, Type IV
Plasticade meets the specification by supplying 3M™ High Intensity Prismatic Grade

Safetycade Barricade®

Collapsible plastic barricade that’s easy to set up and store

•  Stack more on your truck!

    - units use 65% less space than drums

•  Quick set-up

    - spring loaded feet quickly release for placement

•  Lies flat when hit

•  Replaceable sheeting panels

    - recessed panels are removable, just clip on new panels

•  Anti-skid pads on feet reduce movement in work zones

•  7.5 lb. feet - filled with silica sand sold separately

    - optional ballast boots snap on feet adding 20 lbs. each

•  Molded-in light receptacle for “D” cell battery lights

•  NCHRP-350 Accepted, Meets MUTCD Standards

Dimensions: 33"W x 42.5"H x 3"D
Weight: 29 lbs., 69 lbs. with ballast boots