Collection: Airport Barricades

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Type A Barricade flashing light for nighttime use
• Accepts one or two 6 volt lantern battery that lasts up to 4 months
• UV stabilized Hi-Impact polypropylene
• Moisture-proof circuit
• Standard tamper proof mounting bolt
• Meets MUTCD Standards

State Reference Guide

Features and Benefits:

• Solar power ensures long-lasting battery life while being more ecological and efficient.
• The Photocell Sensibility makes this device maintenance free.
• Vibrant yellow color to ensure high visibility
• Lightweight, easy to transport and install
• Long-Lasting high impact polypropylene housing
• Durable polycarbonate lenses
• Proudly made in the USA

The Type B Solar Assist Barricade Light is a safety ensuring accessory for our Barricade collection designed specifically to provide higher visibility on construction areas and runaways, provide protection to pedestrians, workers and vehicles, and have a long-lasting life. It is easy and quick to apply, and has a long battery life that can last up to 8 months.

The amber polycarbonate lenses and yellow high impact polypropylene housing make this one of the strongest, most durable barricade lights.

Made in the USA 

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Type B light
• Solar panels trickle charge the batteries to add life
• Uses two or four "D" cell batteries (not included)
• Meets MUTCD Standards
• Standard tamper proof mounting bolt
• Polycarbonate lenses
• High impact polypropylene housing

State Reference Guide

Features and Benefits:

• Vibrant yellow color to ensure high visibility
• Lightweight, easy to transport and install
• Long-Lasting high impact polypropylene housing
• Durable polycarbonate lenses
• Proudly made in the USA

The Type B High Intensity Barricade Light is a safety ensuring accessory for our Barricade collection designed specifically to provide higher visibility on construction areas and runaways to provide protection to pedestrians, workers, and vehicles. It is easy and quick to apply and has a long battery life that can last up to 4 months.

The amber polycarbonate lenses and yellow high-impact polypropylene housing make this one of the strongest, most durable barricade lights.

Made in the USA 

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Type B light
• Uses two or four "D" cell batteries (not included)
• Meets MUTCD Standards
• Standard tamper proof mounting bolt
• Polycarbonate lenses
• High impact polypropylene housing

State Reference Guide

With a flashing rate of 50–55 times per minute and a brightness of 4.5 candelas, the Solar 360º Light ensures airport barricades are clearly visible to workers, pilots, and pedestrians, even in challenging conditions. Its screw-in design allows for quick, tool-free installation, making it a superior alternative to traditional barricade lights.

Features and Benefits:

• Solar Powered: Long-lasting, eco-friendly power source with extended battery life.
• Automatic Photocell: Activates the light at dusk (100–250 lux) for hands-free operation.
• High Visibility: Four LED bulbs provide 360º illumination at 4.5 candelas.
• Attention-Grabbing: Flashes 50–55 times per minute to enhance safety awareness.
• Easy Installation: Quick screw-in system requires no bolts or external hardware.
• Durable Design: Built for rugged airport and construction environments.

Technical Specifications:

• Photocell Sensitivity: 100–250 lux
• Flash Rate: 50–55 flashes per minute
• Brightness: 4.5 candelas
• Light Source: Four LED bulbs, 360º coverage

State Reference Guide

This Solar 3-Way LED Barricade Light with Battery Option is a safety ensuring accessory for our Barricade collection designed specifically to provide higher visibility on construction areas exposed to heavy weather conditions. It is easy and quick to apply, and offers three settings to complete any barricade set: steady burn, flashing, or off.

The solar option makes this barricade light extra long-lasting with an up to 8-month battery life, the regular option can last up to 4 months. The rugged copolymer case makes this light durable and impact absorbing.

Made in the USA 

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Type A, C, and 3-way light for nighttime use.
• 3 Volt high efficiency LED light
• Uses 2-4 “D” cell batteries
  
• Batteries drop into the base and snap into the case
  
• Moisture-proof circuit
  
• Rugged copolymer case
  
• Standard tamper proof mounting bolNCHRP-350 accepted, Meets MUTCD Standards
• Internal solar panels in Solar Assist trickle charge batteries to add life

State Reference Guide

This product is not part of our State Reference Guide.

This Solar 3-Way LED Barricade Light with Battery Option is a safety ensuring accessory for our Barricade collection designed specifically to provide higher visibility on construction areas exposed to heavy weather conditions. It is easy and quick to apply, and offers three settings to complete any barricade set: steady burn, flashing, or off.

The solar option makes this barricade light extra long-lasting with an up to 8-month battery life, the regular option can last up to 4 months. The rugged copolymer case makes this light durable and impact absorbing.

Made in the USA 

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Type A, C, and 3-way light for nighttime use.
• 3 Volt high efficiency LED light
• Uses 2-4 “D” cell batteries
  
• Batteries drop into the base and snap into the case
  
• Moisture-proof circuit
  
• Rugged copolymer case
  
• Standard tamper proof mounting bolNCHRP-350 accepted, Meets MUTCD Standards
• Internal solar panels in Solar Assist trickle charge batteries to add life

State Reference Guide

This product is not part of our State Reference Guide.

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

Verticade Components: 

• Verticade upright panel (No corrugated plastic panels or sheeting)
• Corrugated Plastic Panel:
• 36" x 12" with Engineer Grade Striped Sheeting - Direction: Left or Right
• 36" x 12" with High Intensity Prismatic Grade Striped Sheeting - Direction: Left or Right

• One foot, 36" long. Assembled with two Square Rubber Pads and one Anti-skid Pad. Foot is filled with silica sand
• Ballast Boot, one unit. Rests over barricade foot and locks in place. Boot comes filled with silica sand
• Plastic panel rivet to attach corrugated plastic panels, four rivets needed for each panel
• Anti-skid Pad Assembly for foot. Contains one anti-skid pad with two push pin rivets to install pad. Assembly is for one foot
• Square Rubber Pad Assembly for foot. Contains two square rubber pads, two bolts, four washers, and two locknuts. Assembly is for one foot
• Assembly hardware for attaching the two feet to upright panel. Includes two springs, two hex bolts, two washers, and two locknuts
• Cap plug for foot, use one per foot
• Cap plug for ballast boot, use one per boot

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

This Product is not a part of our State Reference Guide

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

Replacement Parts Available:

• Threaded Cap: For the water fill hole, providing a tight and reliable closure.
• Screw-Off Cap: For the drain hole, includes a rubber seal to prevent leaks and ensure proper drainage control.

Features and Benefits:

• Direct Fit: Designed specifically for Lo-Pro Airport Barricades.
• Leak-Resistant Seal: Rubber gasket on drain cap prevents water loss.
• Durable Construction: Built to withstand repeated use in demanding environments.
• Easy Replacement: Quick to install for fast maintenance in the field.

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Documents and Certifications:

State Reference Guide

Replacement Parts Available:

• Threaded Cap: For the water fill hole, providing a tight and reliable closure.
• Screw-Off Cap: For the drain hole, includes a rubber seal to prevent leaks and ensure proper drainage control.

Features and Benefits:

• Direct Fit: Designed specifically for Lo-Pro Airport Barricades.
• Leak-Resistant Seal: Rubber gasket on drain cap prevents water loss.
• Durable Construction: Built to withstand repeated use in demanding environments.
• Easy Replacement: Quick to install for fast maintenance in the field.

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Documents and Certifications:

State Reference Guide

For maximum visibility, each Lo-Pro Airport Barricade is designed to accept two flags, making them an essential safety feature for guiding pilots, workers, and ground personnel in active airfield zones.

Features and Benefits:

• High Visibility: Bright 20" × 20" orange vinyl flag improves recognition.
• Stiffener Design: Keeps the flag fully open for consistent visibility.
• Durable Materials: Built to withstand outdoor airport environments.
• Easy Mounting: Includes 3/4"D × 36"L wooden dowel for quick installation.
• System Compatible: Each Lo-Pro barricade accommodates up to two flags.

Product specifications:

• Flag Dimensions: 20" × 20"
• Material: Orange vinyl with stiffener
• Mounting Dowel: 3/4" diameter × 36" length wood
• Compatibility: Lo-Pro Water Filled Airport Barricades (up to two flags per unit)

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

State Reference Guide

Features and Benefits:

• Durable HDPE Construction: Long-lasting material resistant to impact and harsh weather.
• Ballast Capacity: Two fill holes allow water ballast up to 220 lbs. for secure placement.
• Accessory Integration: Includes mounts for barricade lights, flags, and reflective sheeting for maximum visibility.
• High Visibility: Accepts 72”L × 6”H continuous 3M retro-reflective striped sheeting (both sides).
• Interlocking Design: Built-in connectors create continuous lines or pivoted configurations without loose parts.
• Forklift Accessible: Recessed areas at the bottom for easy relocation and deployment.
• Transport & Storage Ready: Multiple stacking lugs ensure safe and efficient handling.
• FAA-Compliant: Meets FAA Advisory Circular AC150/5370-2G requirements.

Note: Component parts are available separately (see Accessories and Replacement Parts above)

Technical Specifications:

• Length: 8 ft.
• Height: 10 in.
• Empty Weight: 25 lbs.
• Ballast Capacity: Up to 220 lbs. water fill (two fill holes, one drain hole)
• Design: Integrated interlock system with enhanced wall thickness on the bottom
• Sidewall: 7° angled profile
• Reflective Sheeting: Accepts 72”L × 6”H continuous retro-reflective sheeting

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Documents and Certifications:

State Reference Guide

Features and Benefits:

• Durable HDPE Construction: Long-lasting material resistant to impact and harsh weather.
• Ballast Capacity: Two fill holes allow water ballast up to 220 lbs. for secure placement.
• Accessory Integration: Includes mounts for barricade lights, flags, and reflective sheeting for maximum visibility.
• High Visibility: Accepts 72”L × 6”H continuous 3M retro-reflective striped sheeting (both sides).
• Interlocking Design: Built-in connectors create continuous lines or pivoted configurations without loose parts.
• Forklift Accessible: Recessed areas at the bottom for easy relocation and deployment.
• Transport & Storage Ready: Multiple stacking lugs ensure safe and efficient handling.
• FAA-Compliant: Meets FAA Advisory Circular AC150/5370-2G requirements.

Note: Component parts are available separately (see Accessories and Replacement Parts above)

Technical Specifications:

• Length: 8 ft.
• Height: 10 in.
• Empty Weight: 25 lbs.
• Ballast Capacity: Up to 220 lbs. water fill (two fill holes, one drain hole)
• Design: Integrated interlock system with enhanced wall thickness on the bottom
• Sidewall: 7° angled profile
• Reflective Sheeting: Accepts 72”L × 6”H continuous retro-reflective sheeting

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Documents and Certifications:

State Reference Guide

Features and Benefits:

• Durable HDPE Construction: Long-lasting material resistant to impact and harsh weather.
• Ballast Capacity: Two fill holes allow water ballast up to 220 lbs. for secure placement.
• Accessory Integration: Includes mounts for barricade lights, flags, and reflective sheeting for maximum visibility.
• High Visibility: Accepts 72”L × 6”H continuous 3M retro-reflective striped sheeting (both sides).
• Interlocking Design: Built-in connectors create continuous lines or pivoted configurations without loose parts.
• Forklift Accessible: Recessed areas at the bottom for easy relocation and deployment.
• Transport & Storage Ready: Multiple stacking lugs ensure safe and efficient handling.
• FAA-Compliant: Meets FAA Advisory Circular AC150/5370-2G requirements.

Note: Component parts are available separately (see Accessories and Replacement Parts above)

Technical Specifications:

• Length: 8 ft.
• Height: 10 in.
• Empty Weight: 25 lbs.
• Ballast Capacity: Up to 220 lbs. water fill (two fill holes, one drain hole)
• Design: Integrated interlock system with enhanced wall thickness on the bottom
• Sidewall: 7° angled profile
• Reflective Sheeting: Accepts 72”L × 6”H continuous retro-reflective sheeting

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Documents and Certifications:

State Reference Guide

Features and Benefits:

• Durable HDPE Construction: Long-lasting material resistant to impact and harsh weather.
• Ballast Capacity: Two fill holes allow water ballast up to 220 lbs. for secure placement.
• Accessory Integration: Includes mounts for barricade lights, flags, and reflective sheeting for maximum visibility.
• High Visibility: Accepts 72”L × 6”H continuous 3M retro-reflective striped sheeting (both sides).
• Interlocking Design: Built-in connectors create continuous lines or pivoted configurations without loose parts.
• Forklift Accessible: Recessed areas at the bottom for easy relocation and deployment.
• Transport & Storage Ready: Multiple stacking lugs ensure safe and efficient handling.
• FAA-Compliant: Meets FAA Advisory Circular AC150/5370-2G requirements.

Note: Component parts are available separately (see Accessories and Replacement Parts above)

Technical Specifications:

• Length: 8 ft.
• Height: 10 in.
• Empty Weight: 25 lbs.
• Ballast Capacity: Up to 220 lbs. water fill (two fill holes, one drain hole)
• Design: Integrated interlock system with enhanced wall thickness on the bottom
• Sidewall: 7° angled profile
• Reflective Sheeting: Accepts 72”L × 6”H continuous retro-reflective sheeting

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Documents and Certifications:

State Reference Guide

Features and Benefits:

• Durable HDPE Construction: Long-lasting material resistant to impact and harsh weather.
• Ballast Capacity: Two fill holes allow water ballast up to 220 lbs. for secure placement.
• Accessory Integration: Includes mounts for barricade lights, flags, and reflective sheeting for maximum visibility.
• High Visibility: Accepts 72”L × 6”H continuous 3M retro-reflective striped sheeting (both sides).
• Interlocking Design: Built-in connectors create continuous lines or pivoted configurations without loose parts.
• Forklift Accessible: Recessed areas at the bottom for easy relocation and deployment.
• Transport & Storage Ready: Multiple stacking lugs ensure safe and efficient handling.
• FAA-Compliant: Meets FAA Advisory Circular AC150/5370-2G requirements.

Note: Component parts are available separately (see Accessories and Replacement Parts above)

Technical Specifications:

• Length: 8 ft.
• Height: 10 in.
• Empty Weight: 25 lbs.
• Ballast Capacity: Up to 220 lbs. water fill (two fill holes, one drain hole)
• Design: Integrated interlock system with enhanced wall thickness on the bottom
• Sidewall: 7° angled profile
• Reflective Sheeting: Accepts 72”L × 6”H continuous retro-reflective sheeting

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Documents and Certifications:

State Reference Guide

Features and Benefits:

• Durable HDPE Construction: Long-lasting material resistant to impact and harsh weather.
• Ballast Capacity: Two fill holes allow water ballast up to 220 lbs. for secure placement.
• Accessory Integration: Includes mounts for barricade lights, flags, and reflective sheeting for maximum visibility.
• High Visibility: Accepts 72”L × 6”H continuous 3M retro-reflective striped sheeting (both sides).
• Interlocking Design: Built-in connectors create continuous lines or pivoted configurations without loose parts.
• Forklift Accessible: Recessed areas at the bottom for easy relocation and deployment.
• Transport & Storage Ready: Multiple stacking lugs ensure safe and efficient handling.
• FAA-Compliant: Meets FAA Advisory Circular AC150/5370-2G requirements.

Note: Component parts are available separately (see Accessories and Replacement Parts above)

Technical Specifications:

• Length: 8 ft.
• Height: 10 in.
• Empty Weight: 25 lbs.
• Ballast Capacity: Up to 220 lbs. water fill (two fill holes, one drain hole)
• Design: Integrated interlock system with enhanced wall thickness on the bottom
• Sidewall: 7° angled profile
• Reflective Sheeting: Accepts 72”L × 6”H continuous retro-reflective sheeting

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Documents and Certifications:

State Reference Guide

These medium-height barricades also work extremely well in low-speed construction zones, parking lots, and specialty applications where federal highway construction zone standards do not apply.

FEATURES & BENEFITS

• 100% FOD-free patented connection system
• Requires no additional hardware or parts
• Barricade shape is low enough not to interfere with aircraft
• Easy to install and break down
• Forklift points allow for easy relocation when filled with water
• Includes factory-installed high-intensity orange and white reflective sheeting

FEDERAL CERTIFICATIONS

• Meets FAA A/C 150/5370-2G “Operational Safety on Airports During Construction”
• “Buy America Act” Compliant

SPECIFICATIONS

• UV-resistant High Density Polyethylene (HDPE)
• Safety Orange
• Blow molded

• Height: 24 in / 60.9 cm
• Length: 96 in / 2.44 m
• Width: 14 in / 35.5 cm

• Empty: 35 lb / 12.7 kg
• Full: Apprx 375 lb / 122.5 kg*
• *Weight calculation based on 30 standard US gallons of water

These medium-height barricades also work extremely well in low-speed construction zones, parking lots, and specialty applications where federal highway construction zone standards do not apply.

FEATURES & BENEFITS

• 100% FOD-free patented connection system
• Requires no additional hardware or parts
• Barricade shape is low enough not to interfere with aircraft
• Easy to install and break down
• Forklift points allow for easy relocation when filled with water
• Includes factory-installed high-intensity orange and white reflective sheeting

FEDERAL CERTIFICATIONS

• Meets FAA A/C 150/5370-2G “Operational Safety on Airports During Construction”
• “Buy America Act” Compliant

SPECIFICATIONS

• UV-resistant High Density Polyethylene (HDPE)
• Safety Orange
• Blow molded

• Height: 24 in / 60.9 cm
• Length: 96 in / 2.44 m
• Width: 14 in / 35.5 cm

• Empty: 35 lb / 12.7 kg
• Full: Apprx 375 lb / 122.5 kg*
• *Weight calculation based on 30 standard US gallons of water

These medium-height barricades also work extremely well in low-speed construction zones, parking lots, and specialty applications where federal highway construction zone standards do not apply.

FEATURES & BENEFITS

• 100% FOD-free patented connection system
• Requires no additional hardware or parts
• Barricade shape is low enough not to interfere with aircraft
• Easy to install and break down
• Forklift points allow for easy relocation when filled with water
• Includes factory-installed high-intensity orange and white reflective sheeting

FEDERAL CERTIFICATIONS

• Meets FAA A/C 150/5370-2G “Operational Safety on Airports During Construction”
• “Buy America Act” Compliant

SPECIFICATIONS

• UV-resistant High Density Polyethylene (HDPE)
• Safety Orange
• Blow molded

• Height: 24 in / 60.9 cm
• Length: 96 in / 2.44 m
• Width: 14 in / 35.5 cm

• Empty: 35 lb / 12.7 kg
• Full: Apprx 375 lb / 122.5 kg*
• *Weight calculation based on 30 standard US gallons of water

These medium-height barricades also work extremely well in low-speed construction zones, parking lots, and specialty applications where federal highway construction zone standards do not apply.

FEATURES & BENEFITS

• 100% FOD-free patented connection system
• Requires no additional hardware or parts
• Barricade shape is low enough not to interfere with aircraft
• Easy to install and break down
• Forklift points allow for easy relocation when filled with water
• Includes factory-installed high-intensity orange and white reflective sheeting

FEDERAL CERTIFICATIONS

• Meets FAA A/C 150/5370-2G “Operational Safety on Airports During Construction”
• “Buy America Act” Compliant

SPECIFICATIONS

• UV-resistant High Density Polyethylene (HDPE)
• Safety Orange
• Blow molded

• Height: 24 in / 60.9 cm
• Length: 96 in / 2.44 m
• Width: 14 in / 35.5 cm

• Empty: 35 lb / 12.7 kg
• Full: Apprx 375 lb / 122.5 kg*
• *Weight calculation based on 30 standard US gallons of water

These medium-height barricades also work extremely well in low-speed construction zones, parking lots, and specialty applications where federal highway construction zone standards do not apply.

FEATURES & BENEFITS

• 100% FOD-free patented connection system
• Requires no additional hardware or parts
• Barricade shape is low enough not to interfere with aircraft
• Easy to install and break down
• Forklift points allow for easy relocation when filled with water
• Includes factory-installed high-intensity orange and white reflective sheeting

FEDERAL CERTIFICATIONS

• Meets FAA A/C 150/5370-2G “Operational Safety on Airports During Construction”
• “Buy America Act” Compliant

SPECIFICATIONS

• UV-resistant High Density Polyethylene (HDPE)
• Safety Orange
• Blow molded

• Height: 24 in / 60.9 cm
• Length: 96 in / 2.44 m
• Width: 14 in / 35.5 cm

• Empty: 35 lb / 12.7 kg
• Full: Apprx 375 lb / 122.5 kg*
• *Weight calculation based on 30 standard US gallons of water

These medium-height barricades also work extremely well in low-speed construction zones, parking lots, and specialty applications where federal highway construction zone standards do not apply.

FEATURES & BENEFITS

• 100% FOD-free patented connection system
• Requires no additional hardware or parts
• Barricade shape is low enough not to interfere with aircraft
• Easy to install and break down
• Forklift points allow for easy relocation when filled with water
• Includes factory-installed high-intensity orange and white reflective sheeting

FEDERAL CERTIFICATIONS

• Meets FAA A/C 150/5370-2G “Operational Safety on Airports During Construction”
• “Buy America Act” Compliant

SPECIFICATIONS

• UV-resistant High Density Polyethylene (HDPE)
• Safety Orange
• Blow molded

• Height: 24 in / 60.9 cm
• Length: 96 in / 2.44 m
• Width: 14 in / 35.5 cm

• Empty: 35 lb / 12.7 kg
• Full: Apprx 375 lb / 122.5 kg*
• *Weight calculation based on 30 standard US gallons of water