Collection: Column and Corner Protectors

• Our Rack protectors are constructed from EVA material, which makes them flexible and resistant. 
• Our Rack protector has an exclusive design that absorbs impact by flexing and returning to shape to work again.
• The bright yellow color gives your racks a highly visible layer of protection that can be easily installed without tools.
• Equipped with hook and loop fasteners.
• The unit installs directly to the rack upright, without the need to drill into the floor and put stress on it.
• Proudly made in the USA

Our Rack protector's main feature is to add a flexible and highly visible layer of protection to your racks, which is incredibly resistant to impacts and very easy to install. For installation, simply remove the hook-n-loop nylon strap, set up the correct size of Rack protector and reattach the strap around the upright. The nylon straps are over-length in case of obstruction behind the upright.

Rack Sentry® has been tested to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without any visible damage to the rack upright, forklift, or product.

Rack protectors are available in a number of sizes to fit most uprights. If you need to protect an area whose temperature is below 0°C, we recommend the use of Rack Sentry LT (Low Temperature).

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Measurements: 

• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• Our Rack protectors are constructed from EVA material, which makes them flexible and resistant. 
• Our Rack protector has an exclusive design that absorbs impact by flexing and returning to shape to work again.
• The bright yellow color gives your racks a highly visible layer of protection that can be easily installed without tools.
• Equipped with hook and loop fasteners.
• The unit installs directly to the rack upright, without the need to drill into the floor and put stress on it.
• Proudly made in the USA

Our Rack protector's main feature is to add a flexible and highly visible layer of protection to your racks, which is incredibly resistant to impacts and very easy to install. For installation, simply remove the hook-n-loop nylon strap, set up the correct size of Rack protector and reattach the strap around the upright. The nylon straps are over-length in case of obstruction behind the upright.

Rack Sentry® has been tested to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without any visible damage to the rack upright, forklift, or product.

Rack protectors are available in a number of sizes to fit most uprights. If you need to protect an area whose temperature is below 0°C, we recommend the use of Rack Sentry LT (Low Temperature).

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Measurements: 

• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• Our Rack protectors are constructed from EVA material, which makes them flexible and resistant. 
• Our Rack protector has an exclusive design that absorbs impact by flexing and returning to shape to work again.
• The bright yellow color gives your racks a highly visible layer of protection that can be easily installed without tools.
• Equipped with hook and loop fasteners.
• The unit installs directly to the rack upright, without the need to drill into the floor and put stress on it.
• Proudly made in the USA

Our Rack protector's main feature is to add a flexible and highly visible layer of protection to your racks, which is incredibly resistant to impacts and very easy to install. For installation, simply remove the hook-n-loop nylon strap, set up the correct size of Rack protector and reattach the strap around the upright. The nylon straps are over-length in case of obstruction behind the upright.

Rack Sentry® has been tested to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without any visible damage to the rack upright, forklift, or product.

Rack protectors are available in a number of sizes to fit most uprights. If you need to protect an area whose temperature is below 0°C, we recommend the use of Rack Sentry LT (Low Temperature).

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Measurements: 

• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• Our Rack protectors are constructed from EVA material, which makes them flexible and resistant. 
• Our Rack protector has an exclusive design that absorbs impact by flexing and returning to shape to work again.
• The bright yellow color gives your racks a highly visible layer of protection that can be easily installed without tools.
• Equipped with hook and loop fasteners.
• The unit installs directly to the rack upright, without the need to drill into the floor and put stress on it.
• Proudly made in the USA

Our Rack protector's main feature is to add a flexible and highly visible layer of protection to your racks, which is incredibly resistant to impacts and very easy to install. For installation, simply remove the hook-n-loop nylon strap, set up the correct size of Rack protector and reattach the strap around the upright. The nylon straps are over-length in case of obstruction behind the upright.

Rack Sentry® has been tested to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without any visible damage to the rack upright, forklift, or product.

Rack protectors are available in a number of sizes to fit most uprights. If you need to protect an area whose temperature is below 0°C, we recommend the use of Rack Sentry LT (Low Temperature).

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Measurements: 

• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• Our Rack protectors are constructed from EVA material, which makes them flexible and resistant. 
• Our Rack protector has an exclusive design that absorbs impact by flexing and returning to shape to work again.
• The bright yellow color gives your racks a highly visible layer of protection that can be easily installed without tools.
• Equipped with hook and loop fasteners.
• The unit installs directly to the rack upright, without the need to drill into the floor and put stress on it.
• Proudly made in the USA

Our Rack protector's main feature is to add a flexible and highly visible layer of protection to your racks, which is incredibly resistant to impacts and very easy to install. For installation, simply remove the hook-n-loop nylon strap, set up the correct size of Rack protector and reattach the strap around the upright. The nylon straps are over-length in case of obstruction behind the upright.

Rack Sentry® has been tested to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without any visible damage to the rack upright, forklift, or product.

Rack protectors are available in a number of sizes to fit most uprights. If you need to protect an area whose temperature is below 0°C, we recommend the use of Rack Sentry LT (Low Temperature).

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Measurements: 

• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• Our Rack protectors are constructed from EVA material, which makes them flexible and resistant. 
• Our Rack protector has an exclusive design that absorbs impact by flexing and returning to shape to work again.
• The bright yellow color gives your racks a highly visible layer of protection that can be easily installed without tools.
• Equipped with hook and loop fasteners.
• The unit installs directly to the rack upright, without the need to drill into the floor and put stress on it.
• Proudly made in the USA

Our Rack protector's main feature is to add a flexible and highly visible layer of protection to your racks, which is incredibly resistant to impacts and very easy to install. For installation, simply remove the hook-n-loop nylon strap, set up the correct size of Rack protector and reattach the strap around the upright. The nylon straps are over-length in case of obstruction behind the upright.

Rack Sentry® has been tested to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without any visible damage to the rack upright, forklift, or product.

Rack protectors are available in a number of sizes to fit most uprights. If you need to protect an area whose temperature is below 0°C, we recommend the use of Rack Sentry LT (Low Temperature).

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Measurements: 

• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• Our Rack protectors are constructed from EVA material, which makes them flexible and resistant. 
• Our Rack protector has an exclusive design that absorbs impact by flexing and returning to shape to work again.
• The bright yellow color gives your racks a highly visible layer of protection that can be easily installed without tools.
• Equipped with hook and loop fasteners.
• The unit installs directly to the rack upright, without the need to drill into the floor and put stress on it.
• Proudly made in the USA

Our Rack protector's main feature is to add a flexible and highly visible layer of protection to your racks, which is incredibly resistant to impacts and very easy to install. For installation, simply remove the hook-n-loop nylon strap, set up the correct size of Rack protector and reattach the strap around the upright. The nylon straps are over-length in case of obstruction behind the upright.

Rack Sentry® has been tested to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without any visible damage to the rack upright, forklift, or product.

Rack protectors are available in a number of sizes to fit most uprights. If you need to protect an area whose temperature is below 0°C, we recommend the use of Rack Sentry LT (Low Temperature).

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Measurements: 

• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

Features and Benefits:

• Our Rack protectors are constructed from EVA material, which makes them flexible and resistant. 
• Our Rack protector has an exclusive design, ideal to cover a 3”x3” rack end, which absorbs impact by flexing and returning to shape to work again. It covers the front and side of a rack upright.
• The bright yellow color gives your racks a highly visible layer of protection that can be easily installed without tools.
• Equipped with hook and loop fasteners.
• The unit installs directly to the rack upright, without the need to drill into the floor and put stress on it.
• Proudly made in the USA

Our Rack protector's main feature is to add a flexible and highly visible layer of protection to your racks, which is incredibly resistant to impacts and very easy to install. For installation, simply remove the hook-n-loop nylon strap, set up the correct size of Rack protector, and reattach the strap around the upright. The nylon straps are over-length in case of obstruction behind the upright.

Rack Sentry® has been tested to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without any visible damage to the rack upright, forklift, or product.

Rack protectors are available in a number of sizes to fit most uprights. If you need to protect an area whose temperature is below 0°C, we recommend the use of Rack Sentry LT (Low Temperature).

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Measurements: 3”x3” opening x 18” tall
• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• Our Soft Padded Column Wrap  is custom sewn with polyethylene foam core,10 oz reinforced rip-stop nylon cover, and two 2” high visibility reflective bands. 
• With our Cushioned Column Wrap you will add visibility for pedestrian and vehicular traffic and protect car doors against impacts.
• Padded covers have a durable outer nylon shell and a dense foam interior.
• The Covers and reflective tape are available in different stock colors, that makes the Column Wrap  highly visible and more striking to look at.
• Proudly made in the USA

Our Soft Padded covers are custom sewn with ½” polyethylene foam core, 10 oz reinforced rip-stop nylon cover, that in addition to its high visibility, also makes it waterproof, mold/mildew proof and fade resistant.  

For safety reasons padded covers offer bright colors and two reflective tapes that makes it visible from long distances. Cushioned Column Wrap is ideal for parking facilities, shopping malls, gas stations, warehouse stores and restaurants; you will prevent car doors from minor impacts!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Height: 44”
• Width: 36”/48"/60"/72"
• Core: ½” thick, closed cell foam
• Material: 10 oz Nylon reinforced rip-stop; waterproof, fade resistant
• Accessories: Velcro attachment
• Material color: Black or Yellow
• Reflective:Two 2” red or white sewn reflective bands
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Our Park Round Column Protector's main feature is to provide protection around parking structure columns and interior building columns, protecting the column and vehicle from collision damage. For safety reasons, Column Protectors are available in bright federal yellow with black reflective straps or black with yellow reflective straps that make the column visible from long distances. If you want extra security, locking buckles can be added.

Please Note: Adjustable Reflective Straps available separately

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Installation Instructions:

1. Measure the column to fit the protector.
2. Cut the Park Sentry panels if needed to fit the column. Cut the panel on the slot side to keep the tabs intact.
3. Connect panels, if necessary, using the integrated tabs and slots.
4. Wrap with the adjustable reflective straps and pull tight against the column. If you are using the locking cinch buckle, snap the lock shut.

Technical Specifications:

• Measurement: (3) each 1” (34mm) thick x 27.6” (702mm) wide x 39.3” (1m) tall
• Material: Specifically engineered ARPRO® material; 100% recyclable material
• Accessories: Straps sold separately
• Material color: Federal Yellow or Black
• Warranty: 30 day limited warranty on all products with regard to manufacturing

Our Park Round Column Protector's main feature is to provide protection around parking structure columns and interior building columns, protecting the column and vehicle from collision damage. For safety reasons, Column Protectors are available in bright federal yellow with black reflective straps or black with yellow reflective straps that make the column visible from long distances. If you want extra security, locking buckles can be added.

Please Note: Adjustable Reflective Straps available separately

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Installation Instructions:

1. Measure the column to fit the protector.
2. Cut the Park Sentry panels if needed to fit the column. Cut the panel on the slot side to keep the tabs intact.
3. Connect panels, if necessary, using the integrated tabs and slots.
4. Wrap with the adjustable reflective straps and pull tight against the column. If you are using the locking cinch buckle, snap the lock shut.

Technical Specifications:

• Measurement: (3) each 1” (34mm) thick x 27.6” (702mm) wide x 39.3” (1m) tall
• Material: Specifically engineered ARPRO® material; 100% recyclable material
• Accessories: Straps sold separately
• Material color: Federal Yellow or Black
• Warranty: 30 day limited warranty on all products with regard to manufacturing

Our Park Square Column Protector's main feature is to provide protection around parking structure columns and interior building columns, protecting the column and vehicle from collision damage. It is made of a combination of corner pieces and flat panels that fit together for a perfect and fast installation. For safety reasons, Column Protectors are available in bright federal yellow with black reflective straps or black with yellow reflective straps that make the column visible from long distances. If you want extra security, locking buckles can be added.

Please Note: Adjustable Reflective Straps available separately for replacement.

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Installation Instructions:

First step: Measure the column and size the planks to fit the column. Any excess strap length can be cut or tucked back behind the strap for a better appearance.

Second step: Place the Protector around the column and fit the components using the included interlocking keys. 

Third step: Extend the reflective straps around it.

• The recessed grommet holes within the belt allow an optional mechanical installation, hidden by the reflective straps.

Technical Specifications:

• Plank: 17.25”x39.3” wide x 1.6” thick
• Corner: 39.3” tall x 2.15” thick and extend 3.35” from the corner
• Material: Specifically engineered ARPRO® material; 100% recyclable material
• Accessories: interlocking keys and a set of straps
• Color: Federal Yellow or Black / Mixed colors
• Warranty: 30 day limited warranty on all products with regard to manufacturing

Our Park Square Column Protector's main feature is to provide protection around parking structure columns and interior building columns, protecting the column and vehicle from collision damage. It is made of a combination of corner pieces and flat panels that fit together for a perfect and fast installation. For safety reasons, Column Protectors are available in bright federal yellow with black reflective straps or black with yellow reflective straps that make the column visible from long distances. If you want extra security, locking buckles can be added.

Please Note: Adjustable Reflective Straps available separately for replacement.

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Installation Instructions:

First step: Measure the column and size the planks to fit the column. Any excess strap length can be cut or tucked back behind the strap for a better appearance.

Second step: Place the Protector around the column and fit the components using the included interlocking keys. 

Third step: Extend the reflective straps around it.

• The recessed grommet holes within the belt allow an optional mechanical installation, hidden by the reflective straps.

Technical Specifications:

• Plank: 17.25”x39.3” wide x 1.6” thick
• Corner: 39.3” tall x 2.15” thick and extend 3.35” from the corner
• Material: Specifically engineered ARPRO® material; 100% recyclable material
• Accessories: interlocking keys and a set of straps
• Color: Federal Yellow or Black / Mixed colors
• Warranty: 30 day limited warranty on all products with regard to manufacturing

Our Park Square Column Protector's main feature is to provide protection around parking structure columns and interior building columns, protecting the column and vehicle from collision damage. It is made of a combination of corner pieces and flat panels that fit together for a perfect and fast installation. For safety reasons, Column Protectors are available in bright federal yellow with black reflective straps or black with yellow reflective straps that make the column visible from long distances. If you want extra security, locking buckles can be added.

Please Note: Adjustable Reflective Straps available separately for replacement.

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Installation Instructions:

First step: Measure the column and size the planks to fit the column. Any excess strap length can be cut or tucked back behind the strap for a better appearance.

Second step: Place the Protector around the column and fit the components using the included interlocking keys. 

Third step: Extend the reflective straps around it.

• The recessed grommet holes within the belt allow an optional mechanical installation, hidden by the reflective straps.

Technical Specifications:

• Plank: 17.25”x39.3” wide x 1.6” thick
• Corner: 39.3” tall x 2.15” thick and extend 3.35” from the corner
• Material: Specifically engineered ARPRO® material; 100% recyclable material
• Accessories: interlocking keys and a set of straps
• Color: Federal Yellow or Black / Mixed colors
• Warranty: 30 day limited warranty on all products with regard to manufacturing

Our Park Square Column Protector's main feature is to provide protection around parking structure columns and interior building columns, protecting the column and vehicle from collision damage. It is made of a combination of corner pieces and flat panels that fit together for a perfect and fast installation. For safety reasons, Column Protectors are available in bright federal yellow with black reflective straps or black with yellow reflective straps that make the column visible from long distances. If you want extra security, locking buckles can be added.

Please Note: Adjustable Reflective Straps available separately for replacement.

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Installation Instructions:

First step: Measure the column and size the planks to fit the column. Any excess strap length can be cut or tucked back behind the strap for a better appearance.

Second step: Place the Protector around the column and fit the components using the included interlocking keys. 

Third step: Extend the reflective straps around it.

• The recessed grommet holes within the belt allow an optional mechanical installation, hidden by the reflective straps.

Technical Specifications:

• Plank: 17.25”x39.3” wide x 1.6” thick
• Corner: 39.3” tall x 2.15” thick and extend 3.35” from the corner
• Material: Specifically engineered ARPRO® material; 100% recyclable material
• Accessories: interlocking keys and a set of straps
• Color: Federal Yellow or Black / Mixed colors
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• BumperWrap protector is available in a 25’ roll that can be cut to length for almost any application. 
• Because of its conformability, it can fit in custom applications that have odd sizes or shapes.
• It is constructed from non-marring vinyl, which is resistant to UV, flexible, and makes it durable giving a long service life.
• The black and yellow vinyl makes it highly visible from long distances.
• You can use multiple layers of BumperWrap to protect any height or section of post.
• Installation is done with heavy duty cable ties or polyethylene strapping, that are hidden in the BumperWrap internal channels. All materials that are required are plastic so they won’t rust or cause vehicle damage.
• Proudly made in the USA

Our BumperWrap protector's main feature is to protect vehicles, columns, light pole bases, beams, and large obstacles from damage. It is ideal for car dealership parking lots, H-beams, railings, and many “non-standard” bollard applications. Our product can also be installed on flat surfaces with commercial adhesive.

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Installation instructions:

First step: Measure the circumference of the object you will wrap.

Second step: Measure length of BumperWraps to fit on the object, and cut to the determined length. A sharp utility knife or heavy-duty scissors will work well to cut BumperWraps. If you want to ensure a square cut, we recommend for you to use a metal framing square or a similar tool. Check if the length is correct by wrapping the cut piece tight around the object, leaving ½” gap for the fasteners. 

Third step: Feed the fasteners through BumperWraps. To ensure the BumperWrap is properly secured in place, we recommend for you to use a minimum of four straps or cable ties per piece. For installations of 48” or less, use heavy-duty cable ties, and for longer installations use ½” plastic strap and buckles. (Silicone spray can be used to aid in sliding the attachment banding into BumperWraps)

Fourth step: Apply the material at the optimum height for vehicle protection and visibility. You can use multiple layers of BumperWrap to protect any height or section of post.

• Description: Black vinyl with yellow stripes
• Length: 25 foot roll, 35lbs.
• Height: 12” wide x 5” thick
• Material: Non-marring vinyl
• Accessories: Cable ties or strapping kit is available to fasten in place (purchased separately)
• Warranty: 1-year warranty

Features and Benefits:

• With our Poletector 360 you can protect vehicles from costly lot damage, eliminating door dings and bumper rubs and lowering long-term maintenance costs.
• You can also give a better appearance to your parking lot, and add a company logo or your own custom logo to it.
• Our Poletector 360 protector is constructed from Polypropylene, which makes it durable and resistant, giving a long service life.
• It is chemical, heat and fatigue resistant.
• Proudly made in the USA

Our Poletector 360 protector's main feature is to provide protection to light pole bases and vehicles from costly lot damage, eliminating door dings and bumper rubs, while enhancing and transforming the appearance of your parking lot. With our product, you will make old and new lots look fresh and complete! If you want to, you can add your company logo or current promotions, as an inviting way to get more traffic through the doors. It can be installed easily without the use of any tool. 

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Outside diameter: 26"
• Inside diameter: 25.5"  (fits up to 24” round or 18” square)
• Height: 41.27”
• Hole Size: 4” round unless otherwise requested
• Wall: 1/8” thick
• Material: Polypropylene
• Accessories: Included - Tough-Lock clips, foam strips
• Colors: black, imperial blue, safety blue, yellow, red, architectural brown, silver, green, orange, & white
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• With our Poletector 360 you can protect vehicles from costly lot damage, eliminating door dings and bumper rubs and lowering long-term maintenance costs.
• You can also give a better appearance to your parking lot, and add a company logo or your own custom logo to it.
• Our Poletector 360 protector is constructed from Polypropylene, which makes it durable and resistant, giving a long service life.
• It is chemical, heat and fatigue resistant.
• Proudly made in the USA

Our Poletector 360 protector's main feature is to provide protection to light pole bases and vehicles from costly lot damage, eliminating door dings and bumper rubs, while enhancing and transforming the appearance of your parking lot. With our product, you will make old and new lots look fresh and complete! If you want to, you can add your company logo or current promotions, as an inviting way to get more traffic through the doors. It can be installed easily without the use of any tool. 

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Outside diameter: 26"
• Inside diameter: 25.5"  (fits up to 24” round or 18” square)
• Height: 41.27”
• Hole Size: 4” round unless otherwise requested
• Wall: 1/8” thick
• Material: Polypropylene
• Accessories: Included - Tough-Lock clips, foam strips
• Colors: black, imperial blue, safety blue, yellow, red, architectural brown, silver, green, orange, & white
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• With our Poletector 360 you can protect vehicles from costly lot damage, eliminating door dings and bumper rubs and lowering long-term maintenance costs.
• You can also give a better appearance to your parking lot, and add a company logo or your own custom logo to it.
• Our Poletector 360 protector is constructed from Polypropylene, which makes it durable and resistant, giving a long service life.
• It is chemical, heat and fatigue resistant.
• Proudly made in the USA

Our Poletector 360 protector's main feature is to provide protection to light pole bases and vehicles from costly lot damage, eliminating door dings and bumper rubs, while enhancing and transforming the appearance of your parking lot. With our product, you will make old and new lots look fresh and complete! If you want to, you can add your company logo or current promotions, as an inviting way to get more traffic through the doors. It can be installed easily without the use of any tool. 

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Outside diameter: 26"
• Inside diameter: 25.5"  (fits up to 24” round or 18” square)
• Height: 41.27”
• Hole Size: 4” round unless otherwise requested
• Wall: 1/8” thick
• Material: Polypropylene
• Accessories: Included - Tough-Lock clips, foam strips
• Colors: black, imperial blue, safety blue, yellow, red, architectural brown, silver, green, orange, & white
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• With our Poletector 360 you can protect vehicles from costly lot damage, eliminating door dings and bumper rubs and lowering long-term maintenance costs.
• You can also give a better appearance to your parking lot, and add a company logo or your own custom logo to it.
• Our Poletector 360 protector is constructed from Polypropylene, which makes it durable and resistant, giving a long service life.
• It is chemical, heat and fatigue resistant.
• Proudly made in the USA

Our Poletector 360 protector's main feature is to provide protection to light pole bases and vehicles from costly lot damage, eliminating door dings and bumper rubs, while enhancing and transforming the appearance of your parking lot. With our product, you will make old and new lots look fresh and complete! If you want to, you can add your company logo or current promotions, as an inviting way to get more traffic through the doors. It can be installed easily without the use of any tool. 

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Outside diameter: 26"
• Inside diameter: 25.5"  (fits up to 24” round or 18” square)
• Height: 41.27”
• Hole Size: 4” round unless otherwise requested
• Wall: 1/8” thick
• Material: Polypropylene
• Accessories: Included - Tough-Lock clips, foam strips
• Colors: black, imperial blue, safety blue, yellow, red, architectural brown, silver, green, orange, & white
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• With our Poletector 360 you can protect vehicles from costly lot damage, eliminating door dings and bumper rubs and lowering long-term maintenance costs.
• You can also give a better appearance to your parking lot, and add a company logo or your own custom logo to it.
• Our Poletector 360 protector is constructed from Polypropylene, which makes it durable and resistant, giving a long service life.
• It is chemical, heat and fatigue resistant.
• Proudly made in the USA

Our Poletector 360 protector's main feature is to provide protection to light pole bases and vehicles from costly lot damage, eliminating door dings and bumper rubs, while enhancing and transforming the appearance of your parking lot. With our product, you will make old and new lots look fresh and complete! If you want to, you can add your company logo or current promotions, as an inviting way to get more traffic through the doors. It can be installed easily without the use of any tool. 

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Outside diameter: 26"
• Inside diameter: 25.5"  (fits up to 24” round or 18” square)
• Height: 41.27”
• Hole Size: 4” round unless otherwise requested
• Wall: 1/8” thick
• Material: Polypropylene
• Accessories: Included - Tough-Lock clips, foam strips
• Colors: black, imperial blue, safety blue, yellow, red, architectural brown, silver, green, orange, & white
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• With our Poletector 360 you can protect vehicles from costly lot damage, eliminating door dings and bumper rubs and lowering long-term maintenance costs.
• You can also give a better appearance to your parking lot, and add a company logo or your own custom logo to it.
• Our Poletector 360 protector is constructed from Polypropylene, which makes it durable and resistant, giving a long service life.
• It is chemical, heat and fatigue resistant.
• Proudly made in the USA

Our Poletector 360 protector's main feature is to provide protection to light pole bases and vehicles from costly lot damage, eliminating door dings and bumper rubs, while enhancing and transforming the appearance of your parking lot. With our product, you will make old and new lots look fresh and complete! If you want to, you can add your company logo or current promotions, as an inviting way to get more traffic through the doors. It can be installed easily without the use of any tool. 

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Outside diameter: 26"
• Inside diameter: 25.5"  (fits up to 24” round or 18” square)
• Height: 41.27”
• Hole Size: 4” round unless otherwise requested
• Wall: 1/8” thick
• Material: Polypropylene
• Accessories: Included - Tough-Lock clips, foam strips
• Colors: black, imperial blue, safety blue, yellow, red, architectural brown, silver, green, orange, & white
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• With our Poletector 360 you can protect vehicles from costly lot damage, eliminating door dings and bumper rubs and lowering long-term maintenance costs.
• You can also give a better appearance to your parking lot, and add a company logo or your own custom logo to it.
• Our Poletector 360 protector is constructed from Polypropylene, which makes it durable and resistant, giving a long service life.
• It is chemical, heat and fatigue resistant.
• Proudly made in the USA

Our Poletector 360 protector's main feature is to provide protection to light pole bases and vehicles from costly lot damage, eliminating door dings and bumper rubs, while enhancing and transforming the appearance of your parking lot. With our product, you will make old and new lots look fresh and complete! If you want to, you can add your company logo or current promotions, as an inviting way to get more traffic through the doors. It can be installed easily without the use of any tool. 

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Outside diameter: 26"
• Inside diameter: 25.5"  (fits up to 24” round or 18” square)
• Height: 41.27”
• Hole Size: 4” round unless otherwise requested
• Wall: 1/8” thick
• Material: Polypropylene
• Accessories: Included - Tough-Lock clips, foam strips
• Colors: black, imperial blue, safety blue, yellow, red, architectural brown, silver, green, orange, & white
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• With our Poletector 360 you can protect vehicles from costly lot damage, eliminating door dings and bumper rubs and lowering long-term maintenance costs.
• You can also give a better appearance to your parking lot, and add a company logo or your own custom logo to it.
• Our Poletector 360 protector is constructed from Polypropylene, which makes it durable and resistant, giving a long service life.
• It is chemical, heat and fatigue resistant.
• Proudly made in the USA

Our Poletector 360 protector's main feature is to provide protection to light pole bases and vehicles from costly lot damage, eliminating door dings and bumper rubs, while enhancing and transforming the appearance of your parking lot. With our product, you will make old and new lots look fresh and complete! If you want to, you can add your company logo or current promotions, as an inviting way to get more traffic through the doors. It can be installed easily without the use of any tool. 

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Outside diameter: 26"
• Inside diameter: 25.5"  (fits up to 24” round or 18” square)
• Height: 41.27”
• Hole Size: 4” round unless otherwise requested
• Wall: 1/8” thick
• Material: Polypropylene
• Accessories: Included - Tough-Lock clips, foam strips
• Colors: black, imperial blue, safety blue, yellow, red, architectural brown, silver, green, orange, & white
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• With our Poletector 360 you can protect vehicles from costly lot damage, eliminating door dings and bumper rubs and lowering long-term maintenance costs.
• You can also give a better appearance to your parking lot, and add a company logo or your own custom logo to it.
• Our Poletector 360 protector is constructed from Polypropylene, which makes it durable and resistant, giving a long service life.
• It is chemical, heat and fatigue resistant.
• Proudly made in the USA

Our Poletector 360 protector's main feature is to provide protection to light pole bases and vehicles from costly lot damage, eliminating door dings and bumper rubs, while enhancing and transforming the appearance of your parking lot. With our product, you will make old and new lots look fresh and complete! If you want to, you can add your company logo or current promotions, as an inviting way to get more traffic through the doors. It can be installed easily without the use of any tool. 

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Outside diameter: 26"
• Inside diameter: 25.5"  (fits up to 24” round or 18” square)
• Height: 41.27”
• Hole Size: 4” round unless otherwise requested
• Wall: 1/8” thick
• Material: Polypropylene
• Accessories: Included - Tough-Lock clips, foam strips
• Colors: black, imperial blue, safety blue, yellow, red, architectural brown, silver, green, orange, & white
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

Features and Benefits:

• With our Poletector 360 you can protect vehicles from costly lot damage, eliminating door dings and bumper rubs and lowering long-term maintenance costs.
• You can also give a better appearance to your parking lot, and add a company logo or your own custom logo to it.
• Our Poletector 360 protector is constructed from Polypropylene, which makes it durable and resistant, giving a long service life.
• It is chemical, heat and fatigue resistant.
• Proudly made in the USA

Our Poletector 360 protector's main feature is to provide protection to light pole bases and vehicles from costly lot damage, eliminating door dings and bumper rubs, while enhancing and transforming the appearance of your parking lot. With our product, you will make old and new lots look fresh and complete! If you want to, you can add your company logo or current promotions, as an inviting way to get more traffic through the doors. It can be installed easily without the use of any tool. 

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Technical Specifications:

• Outside diameter: 26"
• Inside diameter: 25.5"  (fits up to 24” round or 18” square)
• Height: 41.27”
• Hole Size: 4” round unless otherwise requested
• Wall: 1/8” thick
• Material: Polypropylene
• Accessories: Included - Tough-Lock clips, foam strips
• Colors: black, imperial blue, safety blue, yellow, red, architectural brown, silver, green, orange, & white
• Warranty: 1-year warranty against manufacturer defects

Mechanical Drawings

• Our Corners Protectors have a taper shape that allows them to protect the corners and reduce or eliminate damage. 
• The product is constructed from a bright Yellow EVA material, which makes it resistant and highly visible. 
• It can be installed with a fast and easy service using mechanical fasteners or with the Sentry's cinch straps (not included) to square posts or concrete columns. 
• Our product is sold with 4 units per box.
• Proudly made in the USA

Our Corner Protector's main feature is to protect corners absorbing impacts and reducing damage to both the corner and to the vehicle. It can be installed with a fast and easy service using mechanical fasteners through the included fastener grommets, or with the Sentry's cinch straps (not included) to square posts or concrete columns, using the included belt recesses. Some users have reported they could attach the product to corners using construction adhesives, but we recommend discussing this with an adhesive expert regarding the use of adhesives on a polyethylene product and the surface to which it will be attached.

With our 100% effective product, you can protect all the corners of your facility!

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Measurement: covers 4”x4” corner x 2” thick at corner x 1” thick at edge x 42” tall
• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• This extra heavy-duty cable tie has an incredible tensile loop of 175 pounds, so you can rest assured your equipment is secured.
• To ensure the BumperWrap is properly secured in place, we recommend for you to use a minimum of four cable ties per piece.
• Proudly made in the USA

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Color: Black
• Length: 24”/36”/48”/60”
• Width: .35”
• Tensile loop: 175lbs

• This extra heavy-duty cable tie has an incredible tensile loop of 175 pounds, so you can rest assured your equipment is secured.
• To ensure the BumperWrap is properly secured in place, we recommend for you to use a minimum of four cable ties per piece.
• Proudly made in the USA

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Color: Black
• Length: 24”/36”/48”/60”
• Width: .35”
• Tensile loop: 175lbs

• This extra heavy-duty cable tie has an incredible tensile loop of 175 pounds, so you can rest assured your equipment is secured.
• To ensure the BumperWrap is properly secured in place, we recommend for you to use a minimum of four cable ties per piece.
• Proudly made in the USA

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Color: Black
• Length: 24”/36”/48”/60”
• Width: .35”
• Tensile loop: 175lbs

• This extra heavy-duty cable tie has an incredible tensile loop of 175 pounds, so you can rest assured your equipment is secured.
• To ensure the BumperWrap is properly secured in place, we recommend for you to use a minimum of four cable ties per piece.
• Proudly made in the USA

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Color: Black
• Length: 24”/36”/48”/60”
• Width: .35”
• Tensile loop: 175lbs

Features and Benefits:

• Column protector FIT Small 4-sided design can adjust to fit exactly around columns and provides equal protection all around them.
• It has an exclusive air vent system that allows air to escape during impact without dividing the sides. This makes the column protector bounce back impacts and protects structural columns from collision damage.
• It fits perfectly around square, round, or H-columns from 4"x4" (100x100mm) up to 8"x8" (200x200mm) in size.
• The protection zone is incredibly tough and stays constant, no matter what size the column is.
• Our Column protector is constructed from a specific mixture of thick high-density polyethylene and EVA, which makes it durable giving a long service life. 
• Its bright Federal Yellow color makes the column highly visible from long distances. 
• It is weatherproof, chemical resistant, and UV stabilized. 
• Proudly made in the USA

Our Column protector FIT Small's main feature is to provide protection around parking structure columns and interior building columns, protecting the column and vehicle from collision damage. For safety reasons, Column Protectors have a bright federal yellow color that makes the column visible from long distances. Its 16” outside diameter size fits perfectly for mezzanines, conveyors, or other small areas.

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Installation instructions:

First step: Place the four pieces of the Protector around the column and slide two each together, until you have two equal sides.

Second step: Slide the two halves toward each other until it fits the column tightly.

Third step: Wrap the column protector with the 2-sided Velcro straps that are included to the unit.

Fourth step: Admire a job well done, the Column Protector is ready for action!

Technical Specifications:

• Measurement: 16” OD x 42” tall, fits 4"x4" up to 8"x8" 
• Weight: 34lbs
• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• Square Column Protector has an exclusive air vent system that allows air to escape during impact without dividing the sides. This makes the column protector bounce back impacts and protects structural columns from collision damage.
• It fits perfectly around square, round, or H-columns up to 4"x4" (100x100mm) in size.
• The protection zone is incredibly tough and stays constant, no matter what size the column is.
• Our Column protector is constructed from low-density polyethylene, which makes it durable giving a long service life. 
• The column protector is secured with adjustable reflective straps.
• Its bright Federal Yellow color and the reflective straps make the column highly visible from long distances.
• It is weatherproof, chemical resistant and UV stabilized. 
• Proudly made in the USA

Our Square Column Protector's main feature is to provide protection around parking structure columns and interior building columns, protecting the column and vehicle from collision damage. For safety reasons, Column Protectors have a bright federal yellow color that makes the column visible from long distances. Its 14” outside diameter size fits perfectly for mezzanines, conveyors, or other small areas.

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• The protector is delivered with two sides and the attaching hook and loop strap

1. Place the Protector around the column and extend the straps around it.
2. Press the hook and loop straps together until it fits the column tightly.
3. Admire a job well done, the Column Protector is ready for action!

• Measurement: 14” OD x 4”x4” ID x 42” tall
• Weight: 24lbs
• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• Square Column Protector has an exclusive air vent system that allows air to escape during impact without dividing the sides. This makes the column protector bounce back impacts and protects structural columns from collision damage.
• It fits perfectly around square, round, or H-columns up to 6"x6" (150x150mm) in size.
• The protection zone is incredibly tough and stays constant, no matter what size the column is.
• Our Column protector is constructed from low-density polyethylene, which makes it durable giving a long service life. 
• The column protector is secured with adjustable reflective straps.
• Its bright Federal Yellow color and the reflective straps make the column highly visible from long distances.
• It is weatherproof, chemical resistant and UV stabilized. 
• Proudly made in the USA

Our Square Column Protector's main feature is to provide protection around parking structure columns and interior building columns, protecting the column and vehicle from collision damage. For safety reasons, Column Protectors have a bright federal yellow color that makes the column visible from long distances. Its 14” outside diameter size fits perfectly for mezzanines, conveyors, or other small areas.

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• The protector is delivered with two sides and the attaching hook and loop strap

1. Place the Protector around the column and extend the straps around it.
2. Press the hook and loop straps together until it fits the column tightly.
3. Admire a job well done, the Column Protector is ready for action!

• Measurement: 14” OD x 6”x6” ID x 42” tall
• Weight: 24lbs
• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

Features and Benefits:

• Column protector FIT Small 4-sided design can adjust to fit exactly around columns and provides equal protection all around them.
• It has an exclusive air vent system that allows air to escape during impact without dividing the sides. This makes the column protector bounce back impacts and protect structural columns from collision damage.
• It fits perfectly around square, round, or H-columns from 8"x8" (200x200mm) up to 12"x12" (300x300mm) in size.
• The protection zone is incredibly tough and stays constant, no matter what size the column is.
• Our Column protector is constructed from a specific mixture of thick high-density polyethylene and EVA, which makes it durable giving a long service life. 
• Its bright Federal Yellow color makes the column highly visible from long distances. 
• It is weatherproof, chemical resistant, and UV stabilized. 
• Proudly made in the USA

Our Column protector FIT Medium's main feature is to provide protection around parking structure columns and interior building columns, protecting the column and vehicle from collision damage. For safety reasons, Column Protectors have a bright federal yellow color that makes the column visible from long distances. Its 20” outside diameter size fits perfectly for most of the columns.

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Installation instructions:

First step: Place the four pieces of the Protector around the column and slide two each together, until you have two equal sides.

Second step: Slide the two halves toward each other until it fits the column tightly.

Third step: Wrap the column protector with the 2-sided Velcro straps that are included to the unit.

Fourth step: Admire a job well done, the Column Protector is ready for action!

Technical Specifications:

• Measurement: 20” OD x 42” tall, fits 8"x8" up to 12"x12" 
• Weight: 48lbs
• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• Our Square Column Protector has an exclusive air vent system that allows air to escape during impact without dividing the sides. This makes the column protector bounce back impacts and protects the column, the forklift, and the forklift operator from collision damage.
• It fits perfectly around square, round, or H-columns up to 8"x8" (200x200mm) in size.
• The protection zone is incredibly tough and stays constant, no matter what size the column is.
• Our Column protector is constructed from low-density polyethylene, which makes it durable giving a long service life. 
• The column protector is secured with adjustable reflective straps.
• Its bright Federal Yellow color and the reflective straps make the column highly visible from long distances.
• It is weatherproof, chemical resistant and UV stabilized. 
• Proudly made in the USA

Our Square Column Protector's main feature is to provide protection around parking structure columns and interior building columns, protecting the column and vehicle from collision damage. For safety reasons, Column Protectors have a bright federal yellow color that makes the column visible from long distances. 

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• The protector is delivered with two sides and the attaching hook and loop strap

1. Place the Protector around the column and extend the straps around it.
2. Press the hook and loop straps together until it fits the column tightly.
3. Admire a job well done, the Column Protector is ready for action!

• Measurement: 24” OD x 8”x8” ID x 42” tall
• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• Our Square Column Protector has an exclusive air vent system that allows air to escape during impact without dividing the sides. This makes the column protector bounce back impacts and protects the column, the forklift, and the forklift operator from collision damage.
• It fits perfectly around square, round, or H-columns up to 10"x10" (250x250mm) in size.
• The protection zone is incredibly tough and stays constant, no matter what size the column is.
• Our Column protector is constructed from low-density polyethylene, which makes it durable giving a long service life. 
• The column protector is secured with adjustable reflective straps.
• Its bright Federal Yellow color and the reflective straps make the column highly visible from long distances.
• It is weatherproof, chemical resistant and UV stabilized. 
• Proudly made in the USA

Our Square Column Protector's main feature is to provide protection around parking structure columns and interior building columns, protecting the column and vehicle from collision damage. For safety reasons, Column Protectors have a bright federal yellow color that makes the column visible from long distances. 

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• The protector is delivered with two sides and the attaching hook and loop strap

1. Place the Protector around the column and extend the straps around it.
2. Press the hook and loop straps together until it fits the column tightly.
3. Admire a job well done, the Column Protector is ready for action!

• Measurement: 24” OD x 10”x10” ID x 42” tall
• Material: Ethylene vinyl acetate (EVA)
• Material color: Federal Yellow
• Warranty: 30 day limited warranty on all products with regard to manufacturing
• Where is this made: Made in USA

• Our adjustable straps are available in 158” long x 2” wide and 100” long x 2” wide. You can adjust the length of the strap to fit the exact size of your parking protector installation.
• Our Strap-Locking Buckle is incredibly resistant; it snaps shut, making it difficult to remove the strap without cutting through.
• It gives added security to park protectors.
• Proudly made in the USA

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Measurement: (2)158” long x 2” wide/ (2)100” long x 2” wide
• Material: Nylon Weave
• Material color: Reflective Black
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• Our adjustable straps are available in 158” long x 2” wide and 100” long x 2” wide. You can adjust the length of the strap to fit the exact size of your parking protector installation.
• Our Strap-Locking Buckle is incredibly resistant; it snaps shut, making it difficult to remove the strap without cutting through.
• It gives added security to park protectors.
• Proudly made in the USA

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

• Measurement: (2)158” long x 2” wide/ (2)100” long x 2” wide
• Material: Nylon Weave
• Material color: Reflective Black
• Warranty: 30 day limited warranty on all products with regard to manufacturing

• Our strapping kit gives you the ability to cut the strapping to your desired length, so you can fit your BumperWrap in custom applications.
• It is perfect for large applications where you need various lengths.
• To ensure the BumperWrap is properly secured in place, we recommend for you to use a minimum of four straps per piece.
• The kit includes 100 plastic buckles and a hand pull tensioner.
• Proudly made in the USA

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Installation:

Technical Specifications:

• Color: Black strapping and natural buckles
• Length: 1500’
• Width: .5”
• Material: Polypropylene
• Accessories: 100 plastic buckles and 1 hand tensioner

Key Features & Benefits

• Universal Fit – Designed to fit 24" diameter bases; stackable to reach up to 38" height.
• Customizable Pole Opening – Top section easily adapts to round or square light poles.
• Tool-Free Installation – Units snap together around the base with no tools required.
• Durable and Safe – Helps reduce vehicle damage and improve pedestrian safety.
• Enhanced Appearance – Conceals unsightly concrete bases to upgrade parking lot aesthetics.
• Cost-Effective Maintenance – Lowers long-term upkeep costs for outdoor facilities.

Additional Information:

• Available colors: Yellow, Safety Blue, Imperial Blue (Dark), Black
• Ideal for use in malls, airports, stadiums, campuses, and other high-traffic areas
• Units ship in half-circle sections for easy transport and storage

Technical Specifications: 

Model	Color	Weight (lbs)	UPC	GTIN
	Yellow	25	691215120784	00691215120784
	Safety Blue	25	691215120791	00691215120791
	Imperial Blue (Dark)	25	691215120807	00691215120807
	Black	25	691215120814	00691215120814

• Size: 26"W x 26"L x 41.25"H
• Material: Polypropylene
  
• Available Colors:
  • Yellow 
  • Safety Blue
  • Imperial Blue (Dark)
  • Black
• Rings (qty.): 4
• Ring Height (in.): 9-1/2
• Covers round Bases up to (in.): 24
  
• Covers square bases up to (in.): 18
• Inside Diameter (in.): 25.5
  
• Outside Diameter (in.): 26
  
• Overall Height (in.): 41.25
• Installation Hardware Included: Not Required
  
• Manufacturer Warranty: 1 year

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Key Features & Benefits

• Universal Fit – Designed to fit 24" diameter bases; stackable to reach up to 38" height.
• Customizable Pole Opening – Top section easily adapts to round or square light poles.
• Tool-Free Installation – Units snap together around the base with no tools required.
• Durable and Safe – Helps reduce vehicle damage and improve pedestrian safety.
• Enhanced Appearance – Conceals unsightly concrete bases to upgrade parking lot aesthetics.
• Cost-Effective Maintenance – Lowers long-term upkeep costs for outdoor facilities.

Additional Information:

• Available colors: Yellow, Safety Blue, Imperial Blue (Dark), Black
• Ideal for use in malls, airports, stadiums, campuses, and other high-traffic areas
• Units ship in half-circle sections for easy transport and storage

Technical Specifications: 

Model	Color	Weight (lbs)	UPC	GTIN
	Yellow	25	691215120784	00691215120784
	Safety Blue	25	691215120791	00691215120791
	Imperial Blue (Dark)	25	691215120807	00691215120807
	Black	25	691215120814	00691215120814

• Size: 26"W x 26"L x 41.25"H
• Material: Polypropylene
  
• Available Colors:
  • Yellow 
  • Safety Blue
  • Imperial Blue (Dark)
  • Black
• Rings (qty.): 4
• Ring Height (in.): 9-1/2
• Covers round Bases up to (in.): 24
  
• Covers square bases up to (in.): 18
• Inside Diameter (in.): 25.5
  
• Outside Diameter (in.): 26
  
• Overall Height (in.): 41.25
• Installation Hardware Included: Not Required
  
• Manufacturer Warranty: 1 year

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Key Features & Benefits

• Universal Fit – Designed to fit 24" diameter bases; stackable to reach up to 38" height.
• Customizable Pole Opening – Top section easily adapts to round or square light poles.
• Tool-Free Installation – Units snap together around the base with no tools required.
• Durable and Safe – Helps reduce vehicle damage and improve pedestrian safety.
• Enhanced Appearance – Conceals unsightly concrete bases to upgrade parking lot aesthetics.
• Cost-Effective Maintenance – Lowers long-term upkeep costs for outdoor facilities.

Additional Information:

• Available colors: Yellow, Safety Blue, Imperial Blue (Dark), Black
• Ideal for use in malls, airports, stadiums, campuses, and other high-traffic areas
• Units ship in half-circle sections for easy transport and storage

Technical Specifications: 

Model	Color	Weight (lbs)	UPC	GTIN
	Yellow	25	691215120784	00691215120784
	Safety Blue	25	691215120791	00691215120791
	Imperial Blue (Dark)	25	691215120807	00691215120807
	Black	25	691215120814	00691215120814

• Size: 26"W x 26"L x 41.25"H
• Material: Polypropylene
  
• Available Colors:
  • Yellow 
  • Safety Blue
  • Imperial Blue (Dark)
  • Black
• Rings (qty.): 4
• Ring Height (in.): 9-1/2
• Covers round Bases up to (in.): 24
  
• Covers square bases up to (in.): 18
• Inside Diameter (in.): 25.5
  
• Outside Diameter (in.): 26
  
• Overall Height (in.): 41.25
• Installation Hardware Included: Not Required
  
• Manufacturer Warranty: 1 year

Made in the USA

If you would like to request a quotation for large quantities of this or any other products, please email us at sales@linedividers.com or call us at 1-800-288-2832

Key Features & Benefits

• Universal Fit – Designed to fit 24" diameter bases; stackable to reach up to 38" height.
• Customizable Pole Opening – Top section easily adapts to round or square light poles.
• Tool-Free Installation – Units snap together around the base with no tools required.
• Durable and Safe – Helps reduce vehicle damage and improve pedestrian safety.
• Enhanced Appearance – Conceals unsightly concrete bases to upgrade parking lot aesthetics.
• Cost-Effective Maintenance – Lowers long-term upkeep costs for outdoor facilities.

Additional Information:

• Available colors: Yellow, Safety Blue, Imperial Blue (Dark), Black
• Ideal for use in malls, airports, stadiums, campuses, and other high-traffic areas
• Units ship in half-circle sections for easy transport and storage

Technical Specifications: 

Model	Color	Weight (lbs)	UPC	GTIN
	Yellow	25	691215120784	00691215120784
	Safety Blue	25	691215120791	00691215120791
	Imperial Blue (Dark)	25	691215120807	00691215120807
	Black	25	691215120814	00691215120814

• Size: 26"W x 26"L x 41.25"H
• Material: Polypropylene
  
• Available Colors:
  • Yellow 
  • Safety Blue
  • Imperial Blue (Dark)
  • Black
• Rings (qty.): 4
• Ring Height (in.): 9-1/2
• Covers round Bases up to (in.): 24
  
• Covers square bases up to (in.): 18
• Inside Diameter (in.): 25.5
  
• Outside Diameter (in.): 26
  
• Overall Height (in.): 41.25
• Installation Hardware Included: Not Required
  
• Manufacturer Warranty: 1 year