ㅤ

TECHNICAL OVERVIEW
KEY PRODUCT SPECIFICATIONS
POST HEIGHT
40 in
POST DIAMETER
2.75 in
CONSTRUCTION
Extruded aluminum post
BASE
Weighted steel, 14-inch sloped
FLOOR PROTECTION
Factory-applied slotted rubberized base
SYSTEM CONNECTION
Standard 4-way dovetail connection
SOURCE PRODUCT GRAPHICS
VISUAL REFERENCE
4-way belt connection detail
4-way belt connection detail
Weighted, rubberized base detail
Weighted, rubberized base detail
INSTALLATION / ASSEMBLY
SOURCE-BASED PROCEDURE
Condensed for on-page guidance. Use the linked source document below for the complete illustrated procedure, tool list, cautions, and figures when one is provided.
01
Position the Bolt
Pass the center hex bolt through the bottom of the sloped base so it protrudes through the top.
02
Engage the Post
Align the threaded aluminum insert in the post with the bolt and turn the bolt until the threads catch.
03
Seat the Post
Tilt the assembly while pushing the post snugly against the base so the post-to-base connection sits flush.
04
Tighten Securely
Use the supplied 5/16-drive Allen wrench to tighten the center bolt until fully secured. Recheck the post position and retighten if required.
>>>>>
SYSTEM COMPARISON
COMPARE ALL 10 CONFIGURATIONS
PRODUCT
GRAPHIC
7.5" Heavy Duty Magnetic Base - 15 Feet 15 FT
7.5" Heavy Duty Magnetic Base - 10 Feet 10 FT
5.5" Magnetic Base - 15 Feet 15 FT
5.5" Magnetic Base - 10 Feet 10 FT
14" Sloped Base - 15 Feet 15 FT
14" Sloped Base - 10 Feet 10 FT
14.5" Slim Base 10 OR 15 FT
Wall-Mounted Retractable Belt Barrier 10 OR 15 FT
Magnetic Wall-Mounted Retractable Belt 10 OR 15 FT
Glass/Surface Mount Retractable Belt 10 OR 15 FT
PRODUCT 7.5" Heavy Duty Magnetic Base - 15 Feet 7.5" Heavy Duty Magnetic Base - 10 Feet 5.5" Magnetic Base - 15 Feet 5.5" Magnetic Base - 10 Feet 14" Sloped Base - 15 Feet
CURRENT PRODUCT
 14" Sloped Base - 10 Feet 14.5" Slim Base Wall-Mounted Retractable Belt Barrier Magnetic Wall-Mounted Retractable Belt Glass/Surface Mount Retractable Belt
MOUNT / BASE 7.5" heavy-duty magnetic floor base 7.5" heavy-duty magnetic floor base 5.5" compact magnetic floor base 5.5" compact magnetic floor base 14" portable sloped weighted base 14" portable sloped weighted base 14.5" portable slim weighted base Mechanical wall grip connector Magnetic vertical-surface mount Adhesive steel plates on glass / smooth surface
BELT REACH 15 ft 10 ft 15 ft 10 ft 15 ft 10 ft 10 or 15 ft 10 or 15 ft 10 or 15 ft 10 or 15 ft
BEST WHEN Long, fixed-geometry queues need maximum magnetic hold Tighter fixed-geometry queues need maximum magnetic hold Floor footprint must stay minimal across longer spans Floor footprint must stay minimal in dense layouts Portable layouts need wider spans Portable layouts need tighter turns and spacing Portable post with slimmer base profile is preferred Closure repeats in the same location Closure must move between steel surfaces Barrier is needed on glass or smooth surfaces
PRIMARY BENEFIT 18 magnets + 28.7 lbf tip-over force; removable post Heavy magnetic hold + controlled 10-ft geometry Smallest floor footprint with 15-ft reach Smallest floor footprint for dense queues No floor installation; fewer posts over wider spans Maximum portability for compact layouts Portable stability with 10/15-ft flexibility Zero floor footprint; opposing receiver included Tool-free relocation; no permanent fasteners Creates magnetic barrier points on glass/smooth surfaces
Tip: on smaller screens, swipe horizontally to compare all configurations.